相关资料
Relevant information
使用说明
Instructions
1、设备工作地
1. Equipment Workplace
安装地点必须要有大量充足连续的水源供应，以保证搅拌和清洗，原材料便于取放，设备工作地与被充填泥浆施工现场距离越近打浆效率越高。还需要考虑冲洗设备的液体余渣定点排放及处理。
Installation site must have a large number of sufficient and continuous water supply to ensure mixing and cleaning, raw materials are easy to take and put, and the closer the equipment working site is to the construction site of the filled mud, the higher the beating efficiency. It is also necessary to consider the fixed-point discharge and treatment of liquid residue from flushing equipment.
2、操作说明
2. Operation instructions
启动前的准备工作，关闭主电源，认真检查搅拌系统和打浆系统，确定没有任何无关的东西和剩余的材料，然后将打浆系统所有的连接处安装牢固，使手动阀门、操纵杆处于“空挡”或“关闭”状态。
Before start-up, turn off the main power supply, carefully check the mixing system and beating system, determine that there is nothing irrelevant and the remaining material, and then fix all the connections of beating system firmly, so that the manual valve and control rod are in "neutral" or "closed" state.